One gripper. Every part. No jaw changes.
Servo-Flex builds premium servo-electric grippers for industrial robots and cobots — grip 6-120 mm with a single configuration, recover robot payload, and hold the part even when the power is gone.
- Clamping range
- 6-120mm, one configuration
- Gripping force
- 5 kNforce per jaw
- Payload recovered
- +8 kgusable payload
Compatible with the robots you already deploy.
Servo-Flex integrates into existing robot cells.
Why it matters
The flexible gripper that simplifies the cell.
- One gripper instead of many.
- No jaw changes.
- More usable payload.
- Power-loss safe.
Payload economics
Give the robot back its kilograms.
+8kg
On a 40 kg robot, swapping a 12 kg gripper for a 4 kg Servo-Flex lifts usable payload from 28 kg to 36 kg. The recovered weight goes back to the part — not the gripper.
We were the customer first.
Servo-Flex wasn't born in a laboratory.
It was born on a production floor.
In the field
See Servo-Flex in action.
The range
Two grippers. Every cell covered.
2 jawsFlexi 100
The lightweight 2-jaw servo-electric gripper for industrial robots and cobots.
- Only 2 kg — preserves precious cobot payload
- Grips 6–120 mm with one jaw configuration, no manual changes
- Patented mechanical clamping — up to 5 kN per jaw
3 jaws (self-centering)Flexi 150
The 3-jaw servo-electric gripper for heavy, precise industrial handling.
- 3-jaw self-centering grip for precise part positioning
- Up to 5 kN per jaw (≈ 500 kg of clamping force)
- Handles cylindrical parts up to 40 kg
Built for production.
Not for trade shows.
Designed and engineered in Belgium.
Validated over thousands of cycles.
Mechanical locking.
No dropped parts during power loss.
For robot integrators
Design simpler, more compact, more profitable cells.
Fewer gripper references, less commissioning, more uptime, and a cell that is easier to sell to your end customer.
Frequently asked questions
What robots is the Servo-Flex gripper compatible with?
Servo-Flex grippers integrate with all major industrial robots and cobots, including Fanuc, ABB, KUKA, Yaskawa, Universal Robots, Stäubli, Doosan and Omron, using standard mechanical and electrical interfaces.
How does a flexible gripper reduce the number of grippers I need?
A single Servo-Flex grips parts from 6 to 120 mm with one jaw configuration, so it covers part families that would otherwise each require a dedicated gripper — cutting end-of-arm tooling references and inventory.
How much robot payload do I gain with Servo-Flex?
On a 40 kg robot, replacing a 12 kg gripper with a 4 kg Servo-Flex frees 8 kg. Usable payload rises from 28 kg to 36 kg, letting you handle heavier parts with the same robot.
What happens to the part if the power is cut?
The clamping force is locked mechanically, not by continuous power. If the cell loses power, the gripper keeps holding the part — there is no risk of it being dropped.
What is the gripping force of Servo-Flex grippers?
Each jaw delivers up to 5 kN (about 500 kg). Force is adjustable across three levels — light, medium and max — to protect delicate parts or grip heavy ones.
What is the difference between Flexi 100 and Flexi 150?
Flexi 100 is a 2 kg, 2-jaw gripper for industrial robots and cobots, handling parts up to 30 kg. Flexi 150 is a 4 kg, 3-jaw self-centering gripper for industrial robots and cobots, handling cylindrical parts up to 40 kg.
Do I still need to change or adjust jaws between part sizes?
No. Within the rated range, Servo-Flex adapts electrically with no manual jaw change or mechanical adjustment, eliminating changeover downtime and setup error.
Is Servo-Flex pneumatic or electric?
Servo-Flex is fully servo-electric. There are no air lines to route, no compressed-air cost and no pneumatic maintenance — only precise, programmable electric control.
How quickly can integrators expect a return on investment?
By removing jaw changes, reducing gripper references and increasing uptime, most cells see a return within a few weeks, with production capacity gains of up to 10%.
Where is Servo-Flex designed and is it patented?
Servo-Flex is designed and engineered in Belgium. Its mechanical clamping system is patent pending and has been validated over thousands of operating cycles.
What part sizes and weights can Servo-Flex handle?
Servo-Flex grips diameters from 6 to 120 mm and handles parts up to 30 kg (Flexi 100) or 40 kg (Flexi 150), depending on part overhang and orientation.
See Servo-Flex grip your parts.
Book a demonstration with our engineers — tell us your robot and your part range.