Yaskawa robot grippers — flexible & servo-electric
Add Servo-Flex to your Yaskawa cells: one flexible gripper, 6–120 mm, no jaw changes, mechanical hold without power.
From Motoman GP machine tending to the HC cobot series, Servo-Flex gives Yaskawa integrators one flexible, servo-electric gripper that cuts changeovers and air infrastructure.
Mounting & interface
Standard ISO 9409-1 flange adaptation with a Yaskawa-specific adapter plate, controlled over 24 V digital I/O. No compressed air required.
Typical robots
Motoman GP7, Motoman GP25, HC10, HC20
Servo-Flex on Yaskawa
One gripper for your Yaskawa cell
A single Servo-Flex grips 6–120 mm with one jaw configuration, replacing several dedicated tools on your Yaskawa arm.
Recover Yaskawa payload
At 2–4 kg, Servo-Flex returns kilograms to the Yaskawa robot so it can handle the part instead of a heavy tool.
No air on the arm
Fully servo-electric — no pneumatics to route along the Yaskawa robot, no compressed-air cost or maintenance.
Safe on power loss
The mechanical clamp holds the part even if the cell loses power — critical for safe, unattended operation.
Frequently asked questions
Is Servo-Flex compatible with Yaskawa robots?
Yes. Servo-Flex grippers integrate with Yaskawa robots and cobots using standard mechanical flange adaptation and 24 V digital I/O, so they fit common Yaskawa tool interfaces.
How does Servo-Flex mount on a Yaskawa robot?
Servo-Flex adapts to the Yaskawa tool flange (ISO 9409-1 pattern) with a brand-specific adapter plate, and is controlled over simple digital I/O — no compressed air required.
Do I need compressed air on my Yaskawa cell?
No. Servo-Flex is fully servo-electric, so there are no air lines to route along the Yaskawa arm and no pneumatic infrastructure to maintain.
How much payload does Servo-Flex free on a Yaskawa robot?
Because Servo-Flex weighs only 2–4 kg, replacing a heavier tool can return several kilograms of usable payload to the Yaskawa robot — for example +8 kg on a 40 kg arm.
Integrate Servo-Flex on your Yaskawa cell.
Book a demonstration with our engineers — tell us your robot and your part range.