Flexible cobot grippers that keep your payload.
At just 2 kg, the Servo-Flex Flexi 100 grips 6–120 mm with one configuration — so your cobot spends its payload on the part, not the tool.
The problem in the cell
Payload eaten by the tool
Heavy grippers leave little of a cobot's limited payload for the actual part.
Jaw changes on a flexible cell
Cobots are bought for flexibility, then slowed by manual jaw changes between part sizes.
Air lines on a collaborative arm
Pneumatic tooling adds hoses, noise and maintenance to a cell meant to be clean and simple.
How Servo-Flex solves it
Only 2 kg
The Flexi 100 leaves more payload for the part — often the difference between handling it or not.
6–120 mm, one configuration
Cover a wide diameter range with no manual jaw change or re-teach.
Fully servo-electric
No air supply, no hoses on the arm — just clean, programmable electric control.
Safe by design
Force-limited, with blue safety LEDs and a mechanical hold that never drops the part.
Recover the robot payload.
On a 40 kg robot, swapping a 12 kg gripper for a 4 kg Servo-Flex lifts usable payload from 28 kg to 36 kg — heavier parts, same robot.
Usable payload recovered
+8 kg
What you gain
More usable payload
Recover several kilograms for heavier or longer parts on the same cobot.
Higher uptime
No changeovers means the cobot keeps producing across part families.
Simpler, cleaner cell
Fewer components and no pneumatics make the cell easier to deploy and sell.
Flexi 100 & Flexi 150
2 jawsFlexi 100
The lightweight 2-jaw servo-electric gripper for industrial robots and cobots.
- Only 2 kg — preserves precious cobot payload
- Grips 6–120 mm with one jaw configuration, no manual changes
- Patented mechanical clamping — up to 5 kN per jaw
3 jaws (self-centering)Flexi 150
The 3-jaw servo-electric gripper for heavy, precise industrial handling.
- 3-jaw self-centering grip for precise part positioning
- Up to 5 kN per jaw (≈ 500 kg of clamping force)
- Handles cylindrical parts up to 40 kg
Frequently asked questions
What is the best gripper for a cobot?
For most cobots, a lightweight electric gripper is ideal. The 2 kg Servo-Flex Flexi 100 grips 6–120 mm with one configuration and preserves cobot payload while delivering up to 5 kN per jaw.
Will a Servo-Flex gripper reduce my cobot's payload?
Far less than most. At 2 kg, the Flexi 100 leaves more payload for the part — for example raising usable payload from 28 kg to 36 kg on a 40 kg robot versus a 12 kg gripper.
Does the cobot gripper need compressed air?
No. It is fully servo-electric, so there are no air lines on the cobot arm and no compressed-air infrastructure to maintain.
Is it safe for collaborative operation?
Yes. It is force-limited with adjustable levels, shows the gripping zone with blue LEDs, and holds the part mechanically even if power is lost.
See Servo-Flex grip your parts.
Book a demonstration with our engineers — tell us your robot and your part range.